Oil/Wax Melting Soap Melting Tank | Soap Oil Melter

Description
Warranty

Inner Tank Volume: Approximately 16 Gallons (60.56 L) or about 128 lbs (58 kg)
Outer Water Jacket Tank Volume: Approximately 6 Gallons – (22.7 L)

-- Don't put off ordering your Melting Tank until the last minute. There is a world-wide steel shortage. --
-- The projected lead time on tanks is 6-8 weeks. Contact us for current stock levels. --

This Tank has 23% more capacity than the 13 Gallon Tanks previously offered
Exterior Dimensions – 17.25” Diameter x 24" High (43.8 cm x 60.96 cm)
Inner Tank Dimensions - 15.25" Diameter x 21" High (38.7 cm x 53.3 cm)
Inner & Outer Tanks, Fittings, and Lid are 304 Stainless Steel (18 gauge, #4 Polished Steel), Cosmetic Grade and meets Organic Certification Requirements
Slopped Bottom with Outlet at Very Bottom of Tank
Stainless Steel Drain Plug for Outer Tank
Stainless Steel Ball Valve with 1” Stainless Steel Elbow
Made in USA

NEW Features:

Water Level Sight Glass - Know when to Refill your Outer Tank
Tank Thermometer - See the Temperature of your Product in the Inner Tank
Ball Valve Outlet is at the Bottom of Inner Tank (vs on sidewall near the bottom)
Chromalox Heating Element & Thermostat, 1800-watt element, 110-120v. It pulls about 15 amps. Requires 20 amp circuit. (220v available)
All Ports are Centrally Located so you Easily Access Everything you Need From the Front of Your Tank
Sealed Thermostat Box
Heater On Indicator Light to View Status from Across the Room (The indicator light goes off when the set temperature has been reached.)
UL/CSA Certification
CE Certification Required for European markets - Contact us for more information
100% seam welded with Water Cooled TIG machines

What's Included: Tank, Ball Valve, Water Level Sight Glass, Heater/Thermostat, Lid, Tank Thermometer, Drain Plug, Operating Instructions

These Jacketed Melting Tanks can also be used for making/melting: Lip Balm, Deodorants, Shampoos, Conditions, CBD Products, Candle Wax, M&P Base, Soap Oils, Lotions, Creams, & Liquid Soaps

Add-On Options:

Drain Bibb Kit

Insulated Tank Jacket

Can be used several times a day. Once your oils are melted, refill your primary base oils in the same proportion BEFORE your tank is empty. This reduces melting time. Instead of melting 128 pounds a day, you could melt 256-384 or more, depending on the number of times you refill.

Do you use different oils for some of your bar soaps? Then Master Batch in the Jacketed Oil/Wax Melting Tank with your primary oils. Add appropriate amount of your Base Oils to your Mixing Pot (Pot Tipper) from your Melting Tank. Then add your Specialty Oils to your Pot Tipper. Higher Efficiency = Savings in Labor and Dollars. You just increased your Profit Margin!

16 Gallon Oil/Wax Soap Melting Tank–Holds 128 lbs-Stainless Steel-Sloped Bottom (Model 16MH)

Choose Options

Related Items

Similar

Recently Viewed Items